How to Configure your

Personal Speed Dial

1. Open the Internet Browser.

2. Insert the following address in the Address Bar:

http://PABX-IP-ADDRESS/ccme.html

The PABX-IP-ADDRESS is the current IP address of the PABX on the network. This address change from site to site. Examples of addresses are:

http://10.0.0.1/ccme.html

http://192.168.0.254/ccme.html.

Please call Comscentre 1300134680 if you don't know the PABX IP Address.

3. A login window will appear. Insert the login name and password for the phone to be configured.

The username is the extension number with an "x" at the beginning.

The password is "null".

Examples of usernames are:

Extension	Username	Password
200	X200	null
201	X201	null
206	X206	null
221	X221	null

4. After logging in, you will see the Cisco CME System Administration page.

To access the Personal Speed Dial configuration options, go to Configure -> Phone.

5. The Phone configuration page allows 24 Personal Speed Dial numbers for each phone.

To add new speed dials, insert the number and the name under the Personal Fast Dial Information.

Don't forget to include the "0", used to get an external line, in the beginning of the number.

6. Scroll down the page until you find the "Save Change" button. Click on this button to save you new Personal Speed Dial.